Coating Atlas

How to Wash a Ceramic Coated Car: Routine Care Steps

By Coating Atlas6 min readPublished Updated
Hand in a wash mitt moving foam down a dark car door, with a bucket on the ground behind it.
Quick answer

A ceramic coated car is washed by hand with a pH-neutral shampoo, a clean microfiber mitt and a thorough dry. Ceramic Pro and Chemical Guys say about every two weeks, and IGL says every 2 to 4 weeks. Ceramic Pro, IGL and Chemical Guys steer owners away from harsh cleaners and abrasive tools, and Ceramic Pro and IGL say to avoid brush car washes.

How do you wash a ceramic coated car?

You wash a ceramic coated car by hand, gently, with the right soap and a clean mitt. This is the routine for an ordinary wash once the coating is past its first weeks. The aftercare guide covers how long to wait before the first wash.

The steps below combine what Ceramic Pro and Chemical Guys publish. Your coating's own instructions win where they differ.

Six steps for washing a ceramic coated car: pick a shaded spot, rinse and foam, wash wheels first, two-bucket hand wash, rinse, dry.
  1. Pick the time and place. Ceramic Pro says to wash in low sunlight, such as a cloudy day, early morning or near sunset. IGL says to wash in the shade to prevent water spots and streaking.
  2. Rinse and foam. Chemical Guys says to foam from the top down, let the foam sit for 2 to 3 minutes without drying, then hand wash.
  3. Wheels first. Ceramic Pro's aftercare page says to wash the wheels separately before the paint when using the two-bucket method. FEYNLAB says to keep separate wash media for your wheels, so you never drag brake dust and metal particles across the paint.
  4. Wash with two buckets. One holds soapy water and one holds clean rinse water for the mitt. IGL says to use a grit guard. Chemical Guys says to wash in straight lines, not circles, and to rinse the mitt often.
  5. Rinse thoroughly.
  6. Dry completely. Ceramic Pro says a wash isn't finished until the paint is fully dry, and recommends a microfiber drying towel. IGL says to use lint-free microfiber.

How often should you wash a ceramic coated car?

Wash a ceramic coated car every couple of weeks, sooner if it picks up droppings or sap. The makers below give figures from weekly to every 4 weeks.

MakerHow oftenSoapAutomatic car washes
Ceramic ProEvery two weekspH-neutral, no added wax; no soap with a pH under 5.0 or above 9.0Aftercare page: avoid washes that touch the car; touchless is acceptable if you dry the car fully. Its tips page says automated washes can wreck a coating
Chemical GuysEvery two weeks as a general rule in its wash guide; its maintenance guide says weeklypH-neutral shampooIts maintenance guide says touchless washes are safe, while brush systems use recycled harsh chemicals and abrasive contact
IGLEvery 2 to 4 weekspH-neutral, no wax additivesAvoid brush washes; stick to hand washing or touchless
FEYNLABEvery two weeks or so; more often with road salt, heavy pollen or industrial falloutPure Wash, which it says has no fillers, gloss agents or waxesNot stated
CARPRO's US distributor (CQUARTZ)"Regularly"; no interval statedCARPRO Reset; other soaps can leave residueNot stated
GYEONNot statedpH-neutral shampooNot stated

Whether a coated car can use a drive-through wash is a separate question, covered in can a ceramic coated car go through a car wash.

Say you commute on a highway every day and park outside, so your car picks up road film and bugs fast. Treat "every two weeks" as a starting point. FEYNLAB says to wash more often in harder conditions, so if grime builds up sooner, wash sooner.

What soap is safe on a ceramic coating?

A pH-neutral car shampoo with no added wax is the soap makers name. pH is the scale from acid to alkaline, and neutral sits in the middle. Ceramic Pro says wax in a soap may leave residue on the coating. CARPRO's US distributor says other soaps can leave residue that temporarily messes up water beading and lets dust stick.

Chemical Guys goes further, saying acidic or alkaline cleaners can weaken the protective layer, and that strong solvents and abrasive detergents can degrade its hydrophobic (water-repelling) properties. Dish soap is on the "don't" list too: Chemical Guys says dish soap and degreasers can strip wax but aren't designed for ceramic coatings.

Our guide to what's safe to use on a ceramic coating covers sprays and other products, and can you wax a ceramic coated car covers wax.

What tools and water should you use?

You want soft, clean tools and gentle water. Chemical Guys recommends a foam cannon, which attaches to a pressure washer, and a high-quality microfiber mitt, plus cool or lukewarm water. It says hot water can degrade the coating and potentially damage the paint. For pressure washing it gives 1,200 to 1,900 PSI as ideal, from at least 12 inches away.

Ceramic Pro says to make sure towels, mitts and buckets are free of other cleaners, degreasers and debris. GYEON recommends a soft microfiber towel and a high-quality wash mitt. CARPRO's US distributor says to avoid sprinkler and hard tap water when maintaining a coating.

Checklist of what to have ready to wash a ceramic coated car: pH-neutral shampoo, two buckets with a grit guard, microfiber mitt, drying towel, separate wheel tools.

What if you have hard water or can't use a hose?

Water that dries on a coating can leave spots, so dry the car every time. FEYNLAB says to dry the car after washing rather than letting hard water air-dry on the surface. GYEON says industrial fallout, acid rain and water spots can chemically alter the top layer of a coating, and can cause minor etching if left untreated.

Hard water is water with a lot of dissolved minerals. If your tap water leaves spots on glass, a drying towel matters even more.

If you can't use a hose, FEYNLAB sells a rinseless wash. It says the wash cleans without a hose, a pressure washer or runoff. The EPA suggests waterless car wash products for spot-cleaning, or a car wash kit that redirects water from storm drains.

Say you live in an apartment with no hose and a ban on washing at the curb. A rinseless wash, a commercial touchless wash, or a hand wash at a coin-op bay are the options. Check your coating's care sheet first, because Ceramic Pro and IGL steer owners away from brush washes.

Should you wash at home or use a commercial wash?

Where you wash matters for the water. The EPA says commercial car washes are required to properly dispose of wastewater, and many filter and recycle their water. It also says washing a car on pavement leaves the water and the nutrients in the soap no place to go but down the storm drain.

If you wash at home, the EPA says to wash on a pervious surface such as grass or gravel, not concrete or asphalt, and to use nontoxic, phosphate-free soaps. Check your soap label against your coating maker's rules, because the maker's soap advice is about pH and wax additives. Local rules on driveway washing vary, so check your city.

Can you clay or decontaminate a coated car?

You can decontaminate, but the makers differ on how. A decontamination wash removes bonded dirt and iron particles that ordinary shampoo leaves behind.

IGL says never to use clay bars on a coated car, calling them abrasive and able to damage the coating. Ceramic Pro says there is no need for one. Adam's says its Graphene Shampoo alone might not be enough to bring a coating back to life, and that bonded contamination may need a clay mitt.

GYEON says to chemically decontaminate the coating quarterly. It names its Q²M Iron Redefined, which it says dissolves iron particles on contact, and says to spray it on a cool surface and rinse. CARPRO's US distributor suggests its IronX iron remover every 3 to 6 months in one place and every 3 to 12 months in another. See clay bars on coated cars before you try one.

What worries owners about washing a coated car?

If you're worried a coated car doesn't need washing: it does. CARPRO's US distributor calls washing regularly the most important item. Chemical Guys says that removing contamination within seven days prevents bonding that requires aggressive chemical treatment.

If you're worried about swirl marks: the makers' advice is about tools and method, covered in the steps above.

If water beads less over time: that is a sign to check your routine. Adam's says oils and road films can clog a coating. Our guide on signs a coating is wearing off has more.

What about bird droppings, sap and spots?

Remove droppings, tar and sap quickly and gently. Ceramic Pro says to take them off as soon as possible, never use excessive force on spots, and never use aggressive products to polish the coating or remove contamination. It also says stains from droppings break down over a few days without affecting the coating.

Chemical Guys says to wash sooner than usual if the car often meets droppings, sap or heavy dirt. IGL says that in the first 24 hours after coating, you should keep the car away from droppings and sap by not parking under trees. Our guide on bird droppings and coatings goes deeper.

If you would rather leave the work to a shop, ask what care routine your coating needs. Find a ceramic coating installer near you, or see what a coating costs.

Questions

How often should you wash a ceramic coated car?

Ceramic Pro and Chemical Guys say about every two weeks, FEYNLAB says every two weeks or so, and IGL says every 2 to 4 weeks. CARPRO's US distributor calls regular washing the most important item but gives no interval.

Can you use dish soap on a ceramic coating?

Makers advise against it. Chemical Guys says dish soap and degreasers can strip wax but aren't designed for ceramic coatings. Ceramic Pro and IGL both say to use a pH-neutral car shampoo.

What do you do about bird droppings on a coated car?

Remove them quickly. Ceramic Pro says bird droppings, tar and sap should come off as soon as possible, and that staining left behind will break down over a few days without affecting the coating.

Can you wash a ceramic coated car without a hose?

FEYNLAB sells a rinseless wash and says it cleans without a hose, a pressure washer or runoff. The EPA suggests waterless products for spot-cleaning. Check that any product you pick is safe for your coating.

Do you have to dry a ceramic coated car?

Yes, makers say to. Ceramic Pro says a wash isn't finished until the paint is fully dry. FEYNLAB says to dry the car rather than letting hard water air-dry on the surface.

Sources

  • Ceramic Pro: 5 tips to keep your ceramic coated car clean
  • Ceramic Pro coating aftercare
  • Chemical Guys: how to wash a ceramic coated car
  • Chemical Guys: how to remove ceramic coating
  • Chemical Guys: ceramic coating maintenance guide
  • IGL Coatings: ceramic coating aftercare guide
  • CARPRO's US distributor: how to maintain your CQUARTZ coating
  • GYEON USA: how to get the most out of your ceramic coating
  • FEYNLAB: how to maintain a ceramic coated vehicle
  • Adam's Polishes: what is your ceramic coating telling you
  • EPA: what you can do in your home (nutrient pollution)
  • EPA: sources and solutions in and around the home

Checked 5 Nov 2026. Manufacturers change their terms, so confirm with the current document.

Ready to compare quotes?

One request, up to 3 quotes from top-ranked local shops.

Get quotes

A US directory of PPF and ceramic coating installers. Our guides draw on manufacturers' published information and the prices shops publish on their own websites. Brands and shops don't pay for coverage. Read our editorial policy.

Share