Coating Atlas

PPF vs Ceramic Coating: What Each Does and Which to Choose

By Coating Atlas5 min readPublished Updated
Gray car hood with a clear film edge on one side and water beads on the other.
Quick answer

PPF and ceramic coating do different jobs, so the right choice depends on what you want to prevent. XPEL, which sells both, says film is generally better for preventing scratches and chips, and that its coating repels water, dirt and contaminants. Some owners use both, and neither is a promise of how your paint will look in years. We haven't tested either one.

Should you buy PPF or ceramic coating?

Choose between PPF and ceramic coating by the damage you most want to prevent. Paint protection film (PPF) is a clear polyurethane film that an installer sticks to the paint. Ceramic coating is a liquid that hardens into a thin layer. Nothing on this page ranks one above the other, because every claim below is the maker's own and we haven't tested any of it.

Your situationWhat the makers' claims point to
You worry about stone chips and road debrisFilm. XPEL says PPF is generally better for preventing scratches and chips, and SunTek says a coating doesn't match film on rock chips.
You want easier washing and more glossA coating. XPEL says its coating repels water, dirt and contaminants and enhances the car's shine.
You want bothPossible, but check the film warranty first.
You plan to install it yourselfSunTek offers no do-it-yourself film option, and XPEL says DIY film is possible but highly recommends a professional.

What does PPF do?

PPF is a layer of clear polyurethane that is meant to take the hit instead of the paint. XPEL describes it as a transparent, durable polyurethane film, and says ULTIMATE PLUS is 8 mil thick. A mil is one thousandth of an inch. STEK says its DYNOshield is thermoplastic polyurethane, 8 mils thick, and designed to stop rock chips and scratches.

Some films also repair light marks. SunTek says the surface of its film self-heals using heat from the sun, a warm body panel, engine heat or warm water. There is a limit. XPEL says deeper scratches that penetrate the film may not fully heal, and STEK says a scratch through the top coat will not. For a fuller look at the film, see what PPF is made of and how it works.

Film is sold by coverage, so which panels are covered is part of the quote.

What does ceramic coating do?

Ceramic coating makes paint easier to keep clean and adds some resistance to light marks. XPEL says its coating repels water, dirt and contaminants, and makes paint more resilient to minor scratches and swirl marks. For FUSION PLUS PREMIUM, it says the key feature is hydrophobic properties that let water bead up and slide off.

The layer is thin. XPEL's technical data sheet lists FUSION PLUS PREMIUM V2 at 21 to 22 micrometers (0.8 to 0.9 mil). Ceramic Pro says plainly that its coating is not bulletproof and needs routine aftercare. SunTek says a coating's life expectancy can be approximately 1 to 4 years, which is one film maker's view of a competing product.

How do they differ side by side?

PPF and ceramic coating differ mainly in what they are made of and what their makers claim for them.

Paint protection filmCeramic coating
What it isClear polyurethane filmLiquid that hardens into a thin layer
ChipsXPEL: generally better against scratches and chipsSunTek: not the same level of rock chip protection
Light marksSelf-heals with heat (SunTek, XPEL)XPEL: more resilient to minor scratches and swirl marks
Water and washingXPEL says ULTIMATE FUSION's topcoat is hydrophobic, meaning it repels waterXPEL: repels water, dirt and contaminants
Thickness8 mil for XPEL ULTIMATE PLUS and STEK DYNOshield0.8 to 0.9 mil for XPEL FUSION PLUS PREMIUM V2
Installed bySunTek offers no DIY option; XPEL says DIY is possible but highly recommends a professionalXPEL recommends a professional installer for FUSION PLUS PREMIUM and SATIN
Before you washXPEL: 48 hours for ULTIMATE PLUS, FUSION and STEALTH; SunTek: 3 daysCeramic Pro: at least two weeks

What do owners worry about with each one?

Owners tend to worry about chips, about washing, and about whether a product will "wear out."

If you're worried about rock chips, the makers' claims favor film, as the table above shows. Still, XPEL's and STEK's film warranties exclude damage from rock and road debris impact. The warranty covers film defects, not the stones.

If you're worried about washing, the rules differ, and the timeline below shows the waits. Ceramic Pro says not to wash a coated car for at least two weeks after delivery and to avoid automatic car washes that use brushes. It says brushes will scratch the coating and void its warranty.

If you're worried a coating will cause trouble, ask about cure time. Ceramic Pro says curing takes 2 to 3 weeks depending on environmental conditions.

If you're worried you'll wreck a warranty, read the exclusions. XPEL's film warranty lists non-XPEL branded ceramic coatings. STEK's lists non-STEK branded ceramic coatings and other third-party coatings applied after installation.

Timeline of first wash waits: XPEL film 48 hours, SunTek film 3 days, Ceramic Pro coating at least two weeks.

Examples of how to choose

Say you drive a lot of highway miles and the front of the car takes the stones. The makers' claims point toward film on the front. You'd ask a shop to quote the hood, bumper and fenders first.

Say you mainly want a car that is easy to wash and keeps its shine, and you park under cover. The claims point toward a coating. You'd ask the shop which product, how long it takes to cure, and what the maker says about washing.

Say you live in Florida and want film and a coating. Ask the shop which coating goes over the film and whether the film warranty stays valid. Look at PPF installers in Florida and ceramic coating installers in Florida.

Can you use PPF and ceramic coating together?

Yes, and makers address it, but the warranty rules differ by brand. XPEL says you can coat PPF with ceramic coating. It says its FUSION PLUS coating will not void its PPF warranty, and that vehicles with PPF can use FUSION PLUS LITE as a secondary layer of protection. Its warranty also lists non-XPEL branded ceramic coatings as an exclusion, so the coating's brand can matter.

Three layers from the outside in when both are used: ceramic coating, PPF, and your car's paint.

STEK takes another route. It says to treat its film like a ceramic coating, using ceramic coating friendly products, and says its Final Coat raises the DYNOshield warranty from 10 to 12 years. SunTek says its Reaction film is packed with PPF and ceramic coating features. Details are in can you ceramic coat over PPF.

Whatever you choose, ask which coating goes over the film and get "this keeps the film warranty valid" in writing.

How do the stated warranties compare?

Film and coating warranties are different contracts, and the table shows each maker's own wording.

ProductStated termMaker's note
XPEL ULTIMATE PLUS (film)10 yearsYellowing, cracking, blistering, delaminating
SunTek Reaction (film)12-year limitedRestrictions apply, see dealer
SunTek Ultra (film)10-year limitedAgainst cracking, bubbling or yellowing
STEK DYNOshield (film)10 years on its product page, 12 with Final Coat; STEK's global warranty page states 12 years, which may vary by regionDelamination, yellowing, bubbling, cracking on the product page; the warranty page covers yellowing only when a material or manufacturing defect is the sole cause
XPEL FUSION PLUS PREMIUM (coating)8-year transferableNeeds an annual inspection and top-off
XPEL FUSION PLUS SATIN and LITE (coating)4 years and 1 yearTransferable

A warranty term is a contract about defects, not a promise of how long the paint will look good. XPEL says its film warranty applies to the film only. Read how long ceramic coating lasts and how long PPF lasts before you compare years.

What do PPF and ceramic coating cost?

Prices depend on the car, the paint's condition, the coverage and the product. These are prices shops publish, not quotes.

Based on published prices from 1,190 shops · checked 16 Oct 2026. Updated from our data, not quotes.
PackageTypical priceShops
Partial front$900–$1,300610
Full front$1,800–$2,200753
Track pack$2,400–$3,000322
Full body$5,000–$6,500630
Based on published prices from 3,196 shops · checked 14 Nov 2026. Updated from our data, not quotes.
PackageTypical priceShops
1-year coating$350–$650390
3-year coating$650–$1,000604
5-year+ coating$900–$1,4001,052
Wheels & glass$150–$300519

More detail is on our PPF cost and ceramic coating cost pages. Whether the price is worth it is a separate question, covered in is PPF worth it and is ceramic coating worth it.

How do you choose a shop?

Start with the product name and the warranty, not the brand of the shop. Read how to choose a PPF installer, take questions to ask a PPF installer with you, and find a PPF installer or a ceramic coating installer near you. How we rank explains how shops are ordered on the site.

Questions

Can you put ceramic coating over PPF?

Often, but check your film's warranty first. XPEL says you can coat PPF with ceramic coating and that its FUSION PLUS coating will not void its PPF warranty, while its warranty lists non-XPEL ceramic coatings as an exclusion. STEK's warranty similarly excludes non-STEK branded ceramic coatings. Ask which coating your installer will use and whether it keeps the film warranty valid.

Does ceramic coating stop rock chips?

SunTek, which sells film, says ceramic coatings do not offer the same level of rock chip and surface protection as its film. XPEL, which sells both, says film is generally better for preventing physical damage like scratches and chips.

Which lasts longer, PPF or ceramic coating?

Compare the stated terms for the exact products you are quoted. Makers state film warranties of 10 and 12 years and coating terms from 1 to 8 years, but a warranty covers defects under conditions. It is not a promise of how long the paint will look good.

Can I install either one myself?

SunTek says it offers no do-it-yourself film option, and XPEL says professional installation is highly recommended for its film. XPEL says a professional installer is recommended for its FUSION PLUS PREMIUM and SATIN coatings too. Whichever you pick, read the maker's terms before you decide.

Is PPF worth it compared with a coating?

That depends on what you want to prevent and how long you plan to keep the car. Ceramic Pro's article asks how long you plan to keep the vehicle. Our guide to whether PPF is worth it walks through the decision.

Sources

  • XPEL FAQs
  • XPEL warranty information
  • XPEL PPF overview
  • XPEL: Choosing the right ceramic coating (FUSION PLUS)
  • XPEL FUSION PLUS Premium V2 technical data sheet
  • XPEL product care
  • SunTek PPF FAQ
  • SunTek Reaction
  • SunTek Ultra
  • STEK USA: DYNOshield
  • STEK USA FAQ
  • STEK global PPF warranty
  • Ceramic Pro coating aftercare
  • Ceramic Pro: pros and cons of PPF on new cars

Checked 5 Nov 2026. Manufacturers change their terms, so confirm with the current document.

Ready to compare quotes?

One request, up to 3 quotes from top-ranked local shops.

Get quotes

A US directory of PPF and ceramic coating installers. Our guides draw on manufacturers' published information and the prices shops publish on their own websites. Brands and shops don't pay for coverage. Read our editorial policy.

Share