Coating Atlas

How to Choose a PPF Installer: What to Check

By Coating Atlas6 min readPublished Updated
Two gloved hands checking the edge of a clear film on a silver car hood under a ring light.
Quick answer

To choose a PPF installer, decide which film you want, confirm the shop on that brand's own installer finder, then read what the warranty asks of you and look at the shop's finished work. XPEL and STEK tie warranty claims to authorized installers, so a shop's status can matter years after the job. Compare written quotes that name the same film and panels.

How do you choose a PPF installer?

Choose a PPF installer by working in this order: pick the film, confirm the shop with that film's maker, read the warranty, look at finished cars, then compare written quotes. The order matters because the shop and the film are tied together. A great installer on a film you didn't want, or a film with a warranty you can't use, doesn't help you.

Six steps for choosing a PPF installer, from picking the film to comparing written quotes.

For the questions to ask out loud, see questions to ask a PPF installer. For the paperwork, see what a PPF quote should include.

Why start with the film, not the shop?

Starting with the film narrows the field to shops that can actually install it. Makers sell through their own networks. LLumar says its pricing is set by the LLumar dealers who professionally install its products. SunTek says it offers no DIY option and points you to a local SunTek dealer.

Pick two or three films you would be happy with, using PPF brands as a starting point. Then look for shops that carry them. What PPF is made of and how films differ helps if the names are new to you.

Say you've narrowed it to XPEL and STEK. You'd check the XPEL installer locator and STEK's find an installer page, and keep only shops that show up for the film you want.

How do you check that a PPF shop is certified?

Check a shop's status on the film maker's own locator, not on the shop's website. A logo on a shop's site tells you what the shop wants you to think. The maker's finder tells you what the maker recognizes.

Labels differ by brand. STEK's locator shows two tiers:

  • Authorized installers have completed STEK training or another widely recognized course.
  • Black Label installers have completed rigorous qualifications and have ample experience.

STEK also says experience and use of its products may vary between installers, and describes its installer course as a multi-day, hands-on program taught by lead factory installers. A listing is a starting point, not a guarantee.

The FTC makes the same point about repair shops in general: make sure certifications are current, but remember that certification alone is no guarantee of good or honest work. If a shop says it is certified, ask when, for which brand, and to see the certificate.

Does the warranty depend on who installed the film?

For XPEL and STEK it does, and that is the strongest reason to check the installer. The makers' own terms show how.

MakerWhat its warranty says about the installer
XPELProof of installation from an authorized XPEL installer is required to process a claim. You notify the installer who did the work, in writing.
STEK (global warranty page)Valid when installed by an authorized STEK installer following STEK's guidelines. It must be registered through STEK ONE within 30 days of installation.
XPEL ULTIMATE FUSIONAn annual inspection by an XPEL certified Fusion installer is required. Skipping it voids the warranty, and the owner pays the inspection fees.

Ask who registers the warranty, when, and what inspections cost. A shop that handles registration for you should be able to say how.

The FTC speaks to this in general terms. Its staff say a company can't void a warranty or deny coverage solely because a consumer used a part made by someone else or an unauthorized servicer. There are two exceptions: free parts or service, and an FTC waiver. A company can still deny coverage for damage that unauthorized parts or service caused. This is general information, not legal advice. Whether it reaches a PPF warranty is a question for the maker or a lawyer.

What should a shop's finished work show?

A shop's finished work should show clean edges, even seams and no lifting or bubbles, ideally on a car like yours. Ask to see a recent job in person, in daylight, not only photos taken under studio lights. The FTC also suggests asking whether the shop has experience with your make or model.

Checklist of what to inspect on a car with PPF: edges, seams, corners, lifting, bubbles and paint around the film.

Look at the places that are hard to do: panel edges, tight curves, around badges, and where film ends near a headlight or mirror. XPEL says the edge of a partial front wrap may be slightly noticeable depending on paint color and finish, and that installers aim to blend it. So a visible edge is not automatically a fault. Ask the shop where yours will fall.

Also ask how the shop handles paint that already has chips or scratches. Film goes over whatever is there. Ceramic Pro's article says a new vehicle requires less paint correction or prep work. A shop that offers to look at your paint with you before quoting is showing a good habit.

How do you compare PPF installers fairly?

Compare installers by getting written quotes that name the same film and the same panels. If two quotes name different films or different coverage, the gap between them tells you nothing. The FTC's auto repair advice is to ask for a written estimate, get a signed copy, and make sure the shop contacts you for approval before doing work over a set amount. That advice isn't specific to film, and your state may add rules.

Then compare what is left: the warranty each shop will put in writing, who handles claims, and how long the shop has worked with this film. Price is one line in that comparison. See PPF cost for what shops publish.

Say you live in Texas and get two quotes. One names a full front on one film. The other names a full body on a different film. You can't compare them yet. Ask both shops to quote the same film and the same panel list first, then look at the warranty lines. PPF installers in Texas is a place to start.

What do owners worry about when picking a shop?

Most worries come down to three questions: whether the work will last, who fixes it, and what happens if the shop is gone.

If you're worried a problem will show up later, know who starts the claim. XPEL says to notify the authorized installer who did the work, in writing, and that no work should begin until XPEL formally approves the resolution plan. XPEL also says it may assign a different authorized installer. LLumar says lifting caused by pressure washing or automatic car washes isn't covered by its warranty.

If you're worried about labor costs, read the remedy. STEK says its remedy covers the affected area only and that labor, removal and reinstallation are not covered. XPEL's warranty terms say it will cover parts and labor for defective film, and its claims FAQ says labor may be covered depending on the specific product and situation. Get the shop's own promise on labor in writing.

If you're worried you'll move or sell, check transfer terms. XPEL says ULTIMATE PLUS, STEALTH and FUSION warranties transfer with proof of the original install date, and COLOR PPF does not transfer. STEK says its warranty is non-transferable except where the new owner submits proof. Ask your shop how a transfer works.

If you're worried about a dispute, the FTC advises talking to the shop manager or owner first and keeping records of dates, expenses and names. A state attorney general's office or local consumer protection agency may know whether complaints exist about a shop.

Where do you start looking for a PPF installer?

Start with shops that install the film you picked, then run each through the maker's locator. On Coating Atlas you can find a PPF installer in your city, see the films and brands each shop names, and read how we rank to see how shops are ordered. Browse a state such as Florida or Arizona to see shops by city.

Then ask each shop for a written quote on the same film and the same panels. Brand pages like XPEL, STEK and SunTek link to each maker's finder where one exists.

Questions

Does a shop have to be on the brand's locator?

It depends on the warranty. XPEL says proof of installation from an authorized XPEL installer is required to process a claim, and STEK's warranty applies when an authorized STEK installer fits the film. If a brand's page doesn't say what happens with an unlisted shop, ask the brand directly.

What does certified or authorized mean?

It differs by brand. STEK says Authorized installers have completed STEK training or another widely recognized course, and Black Label installers have completed rigorous qualifications and have ample experience. The FTC says certification alone is no guarantee of good or honest work, so ask any shop what it did to earn its label.

Is a big shop safer than a small one?

Size is not what the makers' terms check. XPEL and STEK tie warranties to authorized installers, not to shop size. Judge each shop on the film it quotes, the written warranty, and the finished cars you can see.

Can I fit PPF myself?

SunTek says it offers no DIY PPF options. XPEL says DIY is possible but professional installation is highly recommended. Installing it yourself can affect a warranty that requires an authorized installer, so check the terms first.

What should I do if I'm unhappy with a shop's work?

The FTC's advice on repair disputes is to talk to the shop manager or owner first and to keep records of dates, expenses and names. Your state attorney general's office or local consumer protection agency may know whether complaints exist about a shop.

Sources

  • XPEL warranty information
  • XPEL FAQs
  • XPEL installer locator
  • STEK USA: find an installer
  • STEK USA: PPF training
  • STEK global PPF warranty
  • SunTek PPF FAQ
  • LLumar PPF FAQ
  • Ceramic Pro: pros and cons of PPF on new cars
  • FTC: Auto Repair Basics
  • FTC: Nixing the Fix

Checked 5 Nov 2026. Manufacturers change their terms, so confirm with the current document.

Ready to compare quotes?

One request, up to 3 quotes from top-ranked local shops.

Get quotes

A US directory of PPF and ceramic coating installers. Our guides draw on manufacturers' published information and the prices shops publish on their own websites. Brands and shops don't pay for coverage. Read our editorial policy.

Share