Coating Atlas

XPEL vs SunTek: Stated Warranties, Films and Finishes

By Coating Atlas5 min readPublished Updated
Two plain clear film samples side by side on a black car panel, with soft light on their edges.
Quick answer

XPEL and SunTek are both paint protection film brands sold through installers. SunTek states 12 years on Reaction and XPEL states 10 years on ULTIMATE PLUS, while XPEL's FAQ gives an 8 mil thickness for ULTIMATE PLUS and SunTek's film pages describe thickness only in words. Each maker's claims are its own and we haven't tested either film, so this names no winner.

How do XPEL and SunTek compare at a glance?

XPEL and SunTek compare closely on the basics, and the table below shows where their own pages differ. Everything comes from each maker's website. Coating Atlas is not affiliated with either company, and we haven't tested these films.

XPELSunTek
Main filmsULTIMATE PLUS, ULTIMATE FUSION, STEALTH, COLOR PPFReaction, Ultra, Ultra Matte, Ultra Defense
Stated warranty10 years on ULTIMATE PLUS and STEALTH; 10 plus 4 years on ULTIMATE FUSION12-year limited on Reaction; 10-year limited on Ultra, Ultra Matte and Ultra Defense
Stated thickness8 mil for ULTIMATE PLUSNot given on its film pages
FinishesClear gloss, satin, and color in gloss, satin and metallicHigh gloss, smooth matte and gloss black
Do it yourselfProfessional installation highly recommendedNo DIY option
First wash48 hours (ULTIMATE PLUS, FUSION, STEALTH); 72 hours (COLOR PPF)3 days
Find a shopXPEL installer locatorSunTek dealer finder

If you are new to film, what PPF is and how it works covers the basics first.

What films does each maker sell?

Each maker sells several film lines for different finishes and claims. XPEL describes ULTIMATE PLUS as a film whose topcoat self-heals light scratches and swirl marks, with Edge Seal Technology and vehicle-specific kits. ULTIMATE FUSION adds a hydrophobic topcoat, which means it repels water. STEALTH has a finish that mirrors factory satin paint. XPEL also sells pre-cut kits made to fit an exact make and model.

SunTek lists Reaction, which it says integrates the super hydrophobicity of a ceramic coating with self-healing film. Ultra has a HydroResist top coat that SunTek says increases stain resistance. Ultra Matte is a smooth matte finish. Ultra Defense is what SunTek calls its thickest, most durable film, with added thickness and strength for higher impact resistance. SunTek also lists clear and matte PPF C and PPF M, and a gloss black called Altered Black. For satin and matte options in general, see matte and satin PPF.

How do the warranties compare?

XPEL and SunTek both state warranty terms per film, and each comes with conditions you should read before you buy. A warranty term describes what the maker will cover if the film fails. It is not a promise of how long the film will look good.

XPELSunTek
Longest stated term10 years, plus 4 more on ULTIMATE FUSION12 years on Reaction
What is coveredYellowing, cracking, blistering, delaminatingCracking, bubbling or yellowing on Ultra; not listed on the Ultra Matte, Ultra Defense or Reaction pages
InstallationFilm professionally installed in the manner the company recommendsProfessionally sold and installed film
ConditionsYearly inspection by a certified Fusion installer, owner pays; exclusions include improper washing, automatic car washes and non-XPEL ceramic coatings"Certain restrictions apply; see dealer for warranty details"
RemedyRemove or replace defective film at XPEL's option; replacement is the exclusive remedyNot stated on its film pages
TransferULTIMATE PLUS, STEALTH and FUSION transfer with proof of the original install date; COLOR PPF does not transferNot stated on its film pages

Three details in XPEL's warranty terms are easy to miss. The warranty applies to the film only. Missing the ULTIMATE FUSION inspection voids it. And it excludes rock and road debris impact, so it covers defects in the film, not chips. SunTek's pages send you to a dealer for the restrictions, so ask the shop to put them in writing.

Side by side: XPEL and SunTek on thickness, warranty length, DIY and first wash.

Can you compare thickness and finish?

You can't compare thickness by number, because only XPEL's FAQ gives one for the films compared here. It says ULTIMATE PLUS is 8 mil thick, and a mil is one thousandth of an inch. SunTek's film pages give no number. They call Ultra Defense its thickest film, which tells you about SunTek's own range and nothing about XPEL's.

Finishes overlap. Both sell gloss and matte or satin looks, and both sell color or black options. SunTek says its gloss film has outstanding optical clarity. If a particular look matters to you, ask to see the exact film on a sample panel.

How do the two makers describe self-healing?

XPEL and SunTek both say their films repair scratches using heat. XPEL says its film self-heals minor scratches and swirls through an elastomeric polymer, and that deeper scratches that penetrate the film may not fully heal and could need professional repair or replacement. SunTek says each of its films has a top coat, and that the self-healing surface repairs the majority of scratches using the heat of the sun, a warm body panel, engine heat or warm water.

The wording differs, so ask a shop what its film does with a scratch you can see on a sample. Is all PPF self-healing goes deeper. Our PPF vs ceramic coating page covers what film can and can't do.

How do the care rules differ?

The two makers give different first-wash waits on their own pages. XPEL says to wait 48 hours after installing ULTIMATE PLUS, ULTIMATE FUSION or STEALTH, and 72 hours for COLOR PPF. SunTek says it is best practice to wait 3 days.

Both warn against machine washes. SunTek says to avoid automatic car washers and power washes because they could cause film lifting. XPEL says not to use automatic tunnel car washes on COLOR PPF, that frequent use of automatic washes with harsh brushes can potentially damage the film over time, and that its warranty excludes damage from automatic car washes.

On waxing, SunTek says to wax gloss finishes with a non-abrasive car wax once or twice a year, and that waxes made for matte finishes exist. XPEL says to seal STEALTH with its Ceramic Boost at least once every 6 months. Your installer's sheet for your exact film is the one to follow. How to wash PPF and ceramic coating aftercare cover the rest.

What do owners worry about when comparing the two?

Owners usually worry about three things: picking the wrong brand, what the paperwork means, and what happens if the shop is hard to reach.

If you're worried you'll pick the wrong brand, know that the makers' pages show stated warranties, finishes and care rules. They don't show how a film performs on your car over years, and we haven't tested either one. Ask the shop why it recommends the film it quotes.

If you're worried about the paperwork, compare the same lines for each brand: film name, warranty term, conditions, who registers it. XPEL says a claim needs proof of installation from an authorized XPEL installer and allows 2 to 3 business days to review one. SunTek tells you to ask your dealer for the specific warranty details for the film you buy.

If you're worried about the shop, each maker has its own finder. XPEL calls its list "authorized" installers, and SunTek calls its list dealers. Check the shop for the brand you want.

Say you drive a lot of highway miles and two shops quote you, one on XPEL and one on SunTek. You'd ask each for the exact film, the panel list, the warranty page and the first-wash sheet. Then you'd compare those lines, not the logos.

Say you want a matte look. You'd ask the XPEL shop about STEALTH and the SunTek shop about Ultra Matte, and ask each to show the film on a sample panel.

What matters more than the brand?

Both brands are fitted by installers the makers list, so the installer's work matters as much as the film. XPEL says its warranty applies only to film professionally installed in the manner it recommends, and SunTek's page says certain restrictions apply. Compare how each shop handles edges and prep, and what it will put in writing. Start with questions to ask a PPF installer, how to choose a PPF installer and what a PPF quote should include.

To see which shops name each brand, open the XPEL and SunTek brand pages, or find a PPF installer near you. You can browse by state, such as PPF in Texas or PPF in Arizona. PPF cost shows the prices shops publish.

Questions

Is XPEL better than SunTek?

Nobody can say from the makers' pages, and we haven't tested either film. Their sites let you compare stated warranties, finishes and care rules, but not how a film performs on a car over years. Ask each shop why it recommends the film it quotes.

Why is one quote higher than the other?

Shops set their own prices, and the film line, the coverage and the prep all change the total. Make sure both quotes name the exact film and the same coverage before you compare them.

Does either brand offer a do-it-yourself film?

SunTek says it does not offer any DIY PPF options. XPEL says professional installation is highly recommended, which implies DIY is possible but not advised. XPEL's warranty applies to film professionally installed in the manner it recommends.

Which brand has the longer warranty?

On the films this page compares, SunTek states 12 years on Reaction and XPEL states 10 years on ULTIMATE PLUS, plus a separate 4-year term on ULTIMATE FUSION. A longer number isn't a promise of longer life, and each warranty has conditions.

Can a shop install both brands?

A shop can name more than one brand. Each maker has its own installer or dealer finder, so check the shop for the specific brand you want. The XPEL and SunTek brand pages on this site show which shops name each one.

Sources

  • XPEL warranty information
  • XPEL FAQs
  • XPEL PPF overview
  • XPEL product care
  • XPEL pre-cut kits
  • XPEL installer locator
  • SunTek PPF overview
  • SunTek Reaction
  • SunTek Ultra
  • SunTek Ultra Matte
  • SunTek Ultra Defense
  • SunTek PPF FAQ
  • SunTek dealer finder

Checked 5 Nov 2026. Manufacturers change their terms, so confirm with the current document.

Not affiliated with or endorsed by XPEL or SunTek. Names are shown for reference only.

Ready to compare quotes?

One request, up to 3 quotes from top-ranked local shops.

Get quotes

A US directory of PPF and ceramic coating installers. Our guides draw on manufacturers' published information and the prices shops publish on their own websites. Brands and shops don't pay for coverage. Read our editorial policy.

Share